Loom Knit Slouchy Hat: Bea's Easy Beanie

Greetings! I present to you my latest hat creation: an open-weave slouchy hat, known as Bea's Easy Beanie. 

Here is a close-up of the stitches used in this hat:

For this project, you will need:

• 90 yards of worsted weight yarn (Sample uses Red Heart Super Saver in "Soft Navy")
• a 48 peg loom with a gauge of 5/8" (Knifty Knitter, when it was still with us, used to make a purple version of this loom. Premium Knitting Looms/CinDWood Crafts makes a wonderful loom with the same specifications.)
• a 40 or 41 peg loom with a larger gauge will also work (See end of post for photo.)
• your favorite loom hook
• a crochet hook to weave in ends

Notes: Knit stitches in this pattern are u-knit stitches.

This hat is designed to be slouchy, but you could

knit fewer rows or measure as you go for a custom fit.

Let's get started!

Step 1: Chain cast on the loom (as shown in this video).
Step 2: Knit one row.
Step 3: Purl one row.
Step 4: Knit one row.
Step 5: Repeat Steps 2-4 four more times for a total of five sets or 15 rows.
Step 6: E-wrap one row.
Step 7: Figure-8 stitch one row (as shown in this video).
Step 8: Repeat Steps 6-7 eleven more times for a total of twelve sets or 24 rows.
Step 9: Follow the flat drawstring bind off as shown in this video. I did K1/P1 around the loom instead of K2/P2.
Step 10: Weave in your yarn tail from your cast on.

Your hat is now complete!

The hat measures approximately 10 inches tall with a circumference of 18 inches. This hat will probably best fit older children, teens, and most adults.

Here is what the back of the hat looks like having used the flat drawstring bind off:

Here is the same pattern done using a 40 peg loom with a 3/4" gauge:

As always, feel free to experiment with your own project. You are more than welcome to leave a comment with a photo of your finished hat.

Please don't hesitate to ask any questions you have.

Thanks for reading, and have a great day!

Loom Knit Fingerless Gloves: Shizknit Fingerless Mitts

Hey there! Here is a pattern I've written up for Loom Knit Fingerless Gloves, humorously known as Shizknit Fingerless Mitts. These mitts are knit in the round using a loom with a gauge of 3/8" and 36 pegs.

You will need:

• 90 yards of worsted weight yarn or 105 yards of light weight/DK weight yarn (Sample uses Bernat Softee Baby in "Mint")
• a loom with a gauge of 3/8" and 36 pegs in the round
• Examples include: All-N-One loom, Martha Stewart loom, or the Knitting Board Sock Loom 2
• your favorite loom hook
• row counter (or scrap paper to keep track)
• a tapestry or yarn needle to do the super stretchy bind off
• a crochet hook to cast on and weave in ends

Notes:
Knit stitches in this pattern are u-knit stitches.

I would say that these gloves are about a medium/average size. 
For a smaller size, I recommend using 32 pegs. 
If you're not sure about size, you can use scrap yarn to make a sample glove first.

Let's get started!

Step 1: Chain cast on 36 pegs in the round (as shown in this video).
Step 2: Knit 2 pegs, purl 2 pegs all around the loom.
Step 3: Repeat previous step five more times (totaling six rows).
Step 4: Knit one row.
Step 5: Repeat previous step five more times (totaling six rows).
Step 6: On to the thumb hole...we'll do this first row in the opposite direction. Skip peg 36, and knit pegs 35 thru 1.
Step 7: Skip peg 1, and knit pegs 2 thru 36.
You will be knitting back and forth without connecting your glove six more times, for a total of eight rows.
Step 8: Knit all pegs around the loom for a total of 36 rows.
Step 9: Knit 2 pegs, purl 2 pegs all around the loom.
Step 10: Repeat previous step five more times (totaling six rows).
Step 11: Bind off using this super stretchy bind off.

• Since this item is done in the round, you will follow the bind off above but continue in the round. When you reach the end/beginning of your loom, after you bring the yarn up thru peg one and down on the last peg, bring the yarn up thru peg one again. Then you will remove your mitt from the loom.

Step 12: Weave in the yarn tails from your cast on and bind off.

Repeat all to create the second glove.

Each finished glove measures approximately 7 inches long.

As always, feel free to experiment with your own project. You are more than welcome to leave a comment with a photo of your finished fingerless gloves.

Please don't hesitate to ask any questions you have.

Thanks for reading, and have a splendid day!

Loom Knit Cowl: Ridgeway Cowl

Hello all! I've been working on updating and improving some of my old patterns. Here is one for a loom knit cowl, which I have named the Ridgeway Cowl, done in the round on a 48 peg loom.

You'll only need to know two stitches for this project: e-wrap and purl.

For this project, you will need:

• 65 yards of bulky yarn (Sample uses Deborah Norville Saturate in "Clematis")
• a 48 peg round loom with a gauge of 5/8" (Knifty Knitter, when it was still with us, used to make a purple version of this loom. Premium Knitting Looms [known formerly as CinDWood Crafts] makes a wonderful loom with the same specifications.)
• a 40 or 41 peg loom with a larger gauge will also work but the cowl will be slightly less wide
• your favorite loom hook
• a tapestry or yarn needle to do the super stretchy bind off
• a crochet hook to weave in ends

Let's get started!

Step 1: Double e-wrap cast on the loom (as shown in this video).

Step 2: Purl one row.

Step 3: E-wrap one row.

Step 4: Purl one row.

Step 5: E-wrap one row.

Step 6: Purl one row.

Step 7: E-wrap four rows.

Step 8: Purl one row.

Step 9: E-wrap four rows.

Step 10: Purl one row.

Step 11: E-wrap four rows.

Step 12: Purl one row.

Step 13: E-wrap four rows.

Step 14: Purl one row.

Step 15: E-wrap four rows.

Step 16: E-wrap one row.

Step 17: Purl one row.

Step 18: E-wrap one row.

Step 19: Purl one row.

Step 20: E-wrap one row.

Step 21: Purl one row.

Step 22: Bind off using this super stretchy bind off.

• Since this item is done in the round, you will follow the bind off above but continue in the round. When you reach the end/beginning of your loom, after you bring the yarn up thru peg one and down on the last peg, bring the yarn up thru peg one again. Then you will remove your cowl from the loom.

Step 23: Weave in the yarn tails from your cast on and bind off.

Your cowl is now complete!

The cowl measures 6 inches wide with a circumference of 22 inches and will fit children and adults alike.

As always, feel free to experiment with your own project. You are more than welcome to leave a comment with a photo of your finished cowl. 

Please don't hesitate to ask any questions you have.

Thanks for reading, and have a wonderful day! 

Loom Knit Basic Headband

Hey everyone! Here is a pattern for a super quick and easy headband done in the round on a 36 peg loom.

For this project, you will need:

• 40 yards of bulky yarn (Sample uses Bernat Softee Chunky in "Teal")
• a 36 peg round loom with a gauge of 3/4"
• your favorite loom hook
• a tapestry or yarn needle to do the super stretchy bind off
• a crochet hook to weave in ends

Let's get started!

Step 1: Double e-wrap cast on the loom (as shown in this video).

Step 2: Purl one row.

Step 3: E-wrap one row.

Step 4: Purl one row.

Step 5: Repeat Steps 3-4 eight times.

Step 6: Bind off using this super stretchy bind off.

• Since this item is done in the round, you will follow the bind off above but continue in the round. When you reach the end/beginning of your loom, after you bring the yarn up thru peg one and down on the last peg, bring the yarn up thru peg one again. Then you will remove your headband from the loom.

Step 7: Weave in the yarn tails from your cast on and bind off.

Your headband is now complete!

The headband measures 4 inches wide (some yarn results in a 3.5 inch wide headband) with a circumference of 18 inches and likely will fit older children thru most adults.

As always, feel free to experiment with your own project. You are more than welcome to leave a comment with a photo of your finished headband. 

Please don't hesitate to ask any questions you have.

Thanks for reading, and have a terrific day!

Loom Knit Reversible Super Chunky Headband

Good afternoon! Here is a quick and simple pattern I wrote up for a reversible super chunky headband. The headband is double knit and done on a large gauge long loom.

This pattern uses three strands of worsted weight held together as one using a technique found in this video. This technique is especially great for when you found the perfect color for your project but the yarn is worsted instead of bulky!

The headband made with this pattern is slightly tapered at the ends, but you can certainly chose to make it all one width throughout the project.

For this project, you will need:

• 120 yards of worsted weight yarn (Sample uses I Love This Yarn in "Grey Beard")
• Don't forget to use three strands as one!
• You could definitely try this pattern with bulky yarn or two strands of worsted weight held together, but this may change your total row count.
• a long loom with a gauge of 11/16" and at least 14 peg pairs (7 on each side)
• your favorite loom hook, preferably one that can handle a lot of work (some sections can get very tight when knitting over)
• a crochet hook to remove the item from the loom and weave in ends
• a tapestry or yarn needle to sew the ends of the headband together

Let's get started!

Step 1: Figure-8 cast on (like in this video) 10 total pegs (5 on each side).

Step 2: Knit using the figure-8 stitch for 4 rows.

• When working in the figure-8 stitch, be sure that the stitches on the middle pegs looks like an X like shown: 

• If at any point your stitches do not look like this, you may be in danger of flipping the reversible stitch.
• When knitting over, start at the peg on the opposite side of your working yarn and on the far end of the loom. Then work back and forth between the front and back of the loom, ending on the peg you wrapped last.

Step 3: Increase to 14 total pegs (7 on each side).

• Starting on the pegs on the opposite side of the working yarn and with the help of your loom hook, grab a loop you have just knit off.

• Take the loop and pull it towards the nearest empty peg.

• Twist the loop completely upside down in the direction of the new peg.

• With the help of your loom hook, put the twisted loop on the nearest empty peg.
• Repeat with the peg on the other side of the loom. You will have to tug the loop quite a bit to get it to stretch where you want it to go.

This is how the first side should look after increasing.

• Repeat on the side of the loom with the working yarn (I recommend doing the working yarn peg last).

This is how the second side should look after increasing.

• Lastly, wrap the loom with the figure-8 stitch as you would normally and knit off.

This was a very long explanation, and you are welcome to use another increase method if you prefer. After much trial and error, I settled on this method because others I had tried seemed to make one side of the headband looser than the other side.

Step 4: Breathe! The increasing is the hardest part, promise.

Step 5: Continue to knit in the figure-8 stitch for 50 rows.

Step 6: Decrease back to 10 pegs (5 on each side).

• Simply take the loops on the outer pegs, and place them on the nearest pegs.

Step 7: Wrap the loom with the figure-8 stitch as you would normally.

• The outer pegs will have three sets of loops on them. Knit the bottom two sets over the top set. 
• It may be easier to knit the bottom loop over the top two, and then the bottom loop over the final loop. Just make sure you get all the old loops over and keep the new loops in place.

Step 8: Continue to knit in the figure-8 stitch for 4 rows.

Step 9: Bind off, as shown in this video here. You will only be doing the bind off in the beginning of this video; you can ignore the section about the anchor yarn.

Here is what the project looks like now that it's off the loom:

Step 10: Taking your tapestry or yarn needle and some scrap yarn, sew the ends of your project together using the method of your choice. I usually just play around with the item until it looks right to me.

Step 11: Using your crochet hook, weave in your ends. Be sure to weave them in the middle of the project and not the back side as the project is designed to be reversible. If you don't want the headband to be reversible, you can weave in the ends however you please.

Your headband is now complete!

The headband measures 2.25-3 inches wide with a circumference of 21 inches and will likely fit most teens and adults. To make it shorter or longer, just alter the amount of rows in Step 5.

As always, feel free to experiment with your own project. You are more than welcome to leave a comment with a photo of your finished headband.

Please don't hesitate to ask any questions you have.

Thanks for reading, and have a fabulous day! 

Who???

Greetings, everyone! My name is Kalie.

 I'm a recovering cynic who speaks fluent sarcasm and a little Spanish. I'm very obsessed with introvert/extrovert dynamics and I'm slowly learning to accept myself as an ISFJ (Introverted/Sensing/Feeling/Judging) & HSP (highly sensitive person). I have strong opinions about the Oxford comma and other petty things. I enjoy loom knitting, cross stitching, stargazing, traveling, writing, and reading.

Jovial Knits is where I primarily post loom knit patterns and projects, as well as other crafty activities.

♥♥♥